ProteusElectronicsTalk to an engineer

Machine vision spot lightsStellar

Focused, high-intensity spots.

Pictured: Stellar AL

Focused spot lights available in various angles for targeted, high-intensity illumination where the inspection needs punch, not spread.

Available in white, red and blue.

Request the datasheetFind a light by defect

What a spot light does to a part.

A focused spot puts its whole output on one feature and leaves the rest of the scene unlit.

The bench below is a simulation. Change the part or the wavelength, and drag to look around.

This bench needs WebGL 2. Open the page in a current desktop or mobile browser to try the lights.

Put a part on the bench

Bright field

suits the part on the bench

Where Stellar spot lights work

  • One feature lit hard: a hole, a pin, a weld or a mark.
  • Long working distances, where a ring or bar would spread too wide.
  • Extra light on one problem area in a multi-light setup.

Models and wavelengths

  • Stellar SqWRB
  • Stellar ALW

Also in the family

Stellar RoundWRB

Dimensions, drawings and STEP models are sent with the datasheet.

Choosing a spot light

Beam and distance

A narrow beam puts its whole output on a small area; a wider angle covers more at the same distance.

Aim

Aim from the side to light edges and texture, or close to the lens axis to light flat faces.

Formats

Round, square and AL versions.

Wavelength

White, red and blue.

Tell us what you need to see.

Describe the part, the defect and the working distance. An engineer replies with the light, or designs one.

Talk to an engineersales@proteuselectronics.in