Machine vision bar lightsComet
Homogeneous, directional illumination.
Bar lights for homogeneous illumination, designed to provide direct lighting to the inspection piece. Various colours, intensities, coverage and spread. A source for line-scan cameras and dark-field lighting.
Available in white, red, green and blue.
What a bar light does to a part.
One bar from the side. Relief throws long shadows, so threads and texture stand out, and glossy film stops glaring.
The bench below is a simulation. Change the part or the wavelength, and drag to look around.
Where Comet bar lights work
- Surface texture, embossing, threads and relief, lit from the side so they cast shadows.
- Labels and barcodes under glossy film, with the reflection sent away from the lens.
- Line-scan cameras on conveyors and webs, which need a long, even line of light.
- Dark-field lighting of edges and scratches, with two or four bars around the part.
Models and wavelengths
- Comet-110WR
- Comet-410WRGB
- Comet-HP-150W
- Comet-Sq-410WR
Also in the family
| Comet-210 | WRB |
|---|---|
| Comet-310 | WRGB |
| Comet-550 | WRGB |
| Comet-Sq-310 | WR |
Dimensions, drawings and STEP models are sent with the datasheet.
Choosing a bar light
Length
Choose a bar longer than the field of view in that direction, so the ends of the image are lit as well as the middle.
Angle
A low angle shows texture and relief; a steeper angle lights the surface more evenly. Mount the bar so the mirror reflection from glossy surfaces misses the lens.
One bar or several
One bar gives directional shadows. Two or four bars around the part give even light from several sides.
Wavelength
White, red, green and blue.
Application notes

Directional
Reading barcodes and labels under glossy film or tapeLight from the side with a bar light, at an angle that sends the mirror reflection from the film away from the lens..
Area
Lighting large fields of view evenlyUse a broad area light at an angle, or a pair of them.
Dark field
Finding burrs and chipped edges on machined partsUse dark-field lighting: a low-angle ring light close to the part, or bar lights from the sides.
Backlight
Checking fill level and caps on bottles and jarsUse a backlight behind the bottles.
Tell us what you need to see.
Describe the part, the defect and the working distance. An engineer replies with the light, or designs one.