Machine vision dome lightsAurora
Even diffused light at high lumen output.
Dome lights surround the workpiece with even diffused light at high lumen output: the choice in semiconductor and electronics for text, colour and finish on glossy, curved or uneven surfaces.
Available in white, red, green and blue.
What a dome light does to a part.
Light arrives from every direction at once. Hot spots vanish on curved, shiny parts, so engraving and print read cleanly.
The bench below is a simulation. Change the part or the wavelength, and drag to look around.
Where Aurora dome lights work
- Print, engraving and codes on curved, shiny parts such as bearings, shafts and cans.
- Foil, film and crinkled or embossed packaging.
- Components, connectors and solder joints on electronics.
- Colour and finish checks where hot spots would hide the surface.
Models and wavelengths
- Aurora-100W
- Aurora-200WR
- Aurora Flat-300WRB
- Aurora Tunnel LightW
Also in the family
| Aurora-300 | WRB |
|---|
Dimensions, drawings and STEP models are sent with the datasheet.
Choosing a dome light
Dome size
The dome should cover the whole field of view, with the part close enough to sit inside the even light.
The camera hole
The camera looks through a hole in the top of the dome. On flat, mirror-like faces the hole can show as a dark spot; the flat format or a co-axial light avoids that.
Formats
Hemispherical domes (Aurora-100, 200 and 300), a flat format (Aurora Flat-300) and a tunnel light for long or cylindrical parts.
Wavelength
White, red, green and blue.
Application notes

Dome
Reading engraving on curved, shiny partsUse a dome light.
Dome
Inspecting solder joints and components on PCBsUse a dome light.
Dome
Reading date and lot codes on can ends and capsUse a dome light.
Backlight
Checking tablets in blister pockets before sealingLight the clear forming web from below with a backlight.
Tell us what you need to see.
Describe the part, the defect and the working distance. An engineer replies with the light, or designs one.