Machine vision backlightsNebula
Silhouettes for edge detection.
Diffuse backlights silhouette parts for edge detection and distance measurement: gaskets, fasteners, washers. Bright enough to be used as area lighting for compact installations.
Available in white, red, green and blue.
What a backlight does to a part.
Light from behind turns the part into a silhouette. Surface finish stops mattering: the camera sees only the outline, which is what you measure.
The bench below is a simulation. Change the part or the wavelength, and drag to look around.
Where Nebula backlights work
- Measuring outlines: diameters, lengths, gaps, thread pitch and tooth profiles.
- Presence and position of holes, slots and pins.
- Gaskets, washers, fasteners and stamped parts checked by silhouette.
- Clear and translucent parts: fill levels, bubbles and contamination seen through the part.
Models and wavelengths
- Nebula-120WRGB
- Nebula-300WRGB
Also in the family
| Nebula-50 | WR |
|---|---|
| Nebula-80 | WRB |
| Nebula-500 | WRGB |
Dimensions, drawings and STEP models are sent with the datasheet.
Choosing a backlight
Size
Choose a backlight larger than the part's silhouette, so every edge sits over evenly lit area.
Uniformity
Even brightness across the panel keeps the threshold stable from the centre of the image to the corners.
Stray light
Keep other lights off the camera side of the part, or the surface finish creeps back into the image.
Wavelength
Red is a common choice with monochrome cameras; blue can sharpen fine edges. White, red, green and blue are available, and custom sizes up to 2000 mm.
Application notes

Backlight
Inspecting threads, profiles and gear teeth with a backlightUse a backlight.
Backlight
Checking holes and slots on stamped and machined partsUse a backlight.
Backlight
Checking fill level and caps on bottles and jarsUse a backlight behind the bottles.
Backlight
Checking tablets in blister pockets before sealingLight the clear forming web from below with a backlight.
Tell us what you need to see.
Describe the part, the defect and the working distance. An engineer replies with the light, or designs one.